75x100x16 Steel Building

A 75x100x16 steel building provides you with not only 7500 square feet of clear floor space, you also get plenty of height clearance as well.  Whether you use it for auto lifts or storage racks, you are sure to have ample room for whatever your needs are.  With lots usable floor space, this size steel building has tons of potential for whatever your needs are.

A 100' long building is typically designed with 4-25' bays.  This gives you room for additional roll up doors, walk doors and even storefront glass and doors.  You also have ample space on the end wall to have an even larger door opening for large equipment.

Whether you are looking to open a new business, expand your current business, or need space for your hobby, Renegade can help you with your project to get the best building at the best price to suit your needs.  Let us know what we can do to help with your project.
100x100 steel building illustration

How much does a 75x100x16 steel building cost?

There are many factors in the cost of a steel building such as wind and snow loads and options you want on your building. As you can see below, there is a range depending on how you design your building.

75x100x16 steel building: $35,350

Shipping and tax not included
*Pricing based on specified wind and snow load, your location may require different loads which may affect the price. Prices subject to change without notice.
  • IBC 2018 code (115 mph wind / 5 psi ground snow)
  • Stamped Engineered Plans
  • 1:12 roof pitch
  • (1) 3070 walk door
  • (1) 12×12 Framed Openings
  • (1) 12×12 Roll Up doors
  • Simple Eave Trim
  • Galvalume Roof


Renegade Standard Features

I-beam mainframe construction
Galvalume Roof Panels
26 Gauge "PBR" roof and wall panels
Long Life fasteners in the roof & walls
Nuts and bolts for framing (anchor bolts not included)
Clear span design unless otherwise requested
Deluxe Trim
Formed Ridge cap
Designed for your location
Engineer Stamped Drawings


Renegade Options

Canopy
Color Roof
Roof line extensions
Soffit panels for extensions
Gutters and Downspouts
Skylights
Wall lights
Windows
Wainscot
Liner Panels
Insulation
Roof Pitch
Vent Fan
Roll Up door
Ridge Vent
Cupola
Higher Eave Height
*Images above are for illustration purposes only and are not representative of the pricing.

What makes a Renegade Steel Building Different?

PBR Panels

"PBR" stands for Purlin Bearing Rib. While others may use a standard panel, Renegade uses the "PBR" panel on the roof and walls of our buildings. This gives the system rigidity and weathertightness. Other profiles are available with the purlin bearing system.
Image Image

Why it matters

If you watch the illustrations you'll notice that the screw that attaches at the panel overlap high rib.  On the PBR panel on the top, the screw is able to penetrate both panels equally.  On the Non-PBR panel in the second illustration, you will notice that there is no support which can lead to the screw pushing in on the bottom panel causing a gap.
Image

Long Life Screws

Renegade's long-life, self drilling fasteners are cast aluminum zinc with a EPDM sealing washer help enforce the finish warranties and ensure a long lasting, rust free building. We include these on both the roof and walls.

Why it matters

Not all steel building companies provide these screws for both roof and walls.  Without the sealing washer, you are more likely to see a leak and if the screw head scratches the finish, you could even see rust on your panels .
Image

Formed Base Trim

The base of our buildings uses formed base trim. This heavier gauge, one piece system installs quicker and supports your manufacturers warranty for your wall panels.

Why it matters

Other base conditions can be base angle and flashing or a concrete notch.  The 2 piece system can have issues with installation and the old concrete notches can hold water.
Image

Framed Openings

Whenever a customer wants a window, we always like to include a framed opening. This provides a sturdy and secure structure for the window to attach to allowing for better fit and finish. Other companies may take the cheap approach and just sell a window that simply screws into the wall panel.

Why it matters

Sure, you can just screw a self flashing window to the wall panel, but why would you.  Every steel building allows for a small amount of movement due to wind and seismic activity.  These movements can cause a window to work loose over time if there is no frame to attach to.
Image

Factory Welded Clips

Clips for the roof purlins and wall girts are factory located and welded saving you time when erecting your building.

Why it matters

Having the clips factory located means less labor and quicker install times, not to mention fewer nuts and bolts to deal with.

More Steel Building Sizes

30x40    30x50    40x60    40x75    50x75    50x100

Give us a call today at 877-363-4233, email us at sales@renegadebuildings.com or fill out our quote form.

Get your free quick quote today