Your Steel Building Specialist
A 30x30 Metal Building kit is a great size for residential garage or workshop. With 900 square feet of open, usable space due to the clear span design, you will be able to utilize the whole building to suit your needs.
If you have to squeeze everything you have into a corner of your garage or basement, it might end up looking like this mess. Everything piled on top of each other and almost impossible to get to anything.
This small space leave no room to actually work on anything other than your balance trying not to trip over stuff. Why not utilize a 30x30 steel building to give you the space you need to clean up a mess like this and have a safe place to work?
If you're like me and have more stuff than you have space for, a 30x30 metal building kit is the perfect choice to give you enough room to enjoy your shop again.
How much is a 30x30 metal building kit?
There are many factors in the cost of a steel building such as wind and snow loads and options you want on your building. As you can see below, there is a range depending on how you design your building.
30x30x10 prices starting at: $10,600*+ shipping & tax (where applicable)
Additional options allow you to customize your building just the way you want it! These options can effect your price. That's whey we are here, to help you get the building you want with the options you need at a great price!
What makes a Renegade Steel Building different?
Glad you asked! Not all steel buildings are made the same. We specify requirements to make a Renegade Steel Building the best you can get for your money.
Let's start with the structure itself. Items such as girt and purlin clips are factory welded to the primary and secondary members. This means your erector won't spend extra time bolting on those clips in the proper location.
The base of our buildings uses formed base trim. This heavier gauge, one piece system installs quicker and reduces the possibility of problems seen with 2 piece systems as well as supporting your manufacturers warranty on wall panels.
Renegade's long-life, self drilling fasteners are cast aluminum zinc with a EPDM sealing washer help enforce the finish warranties and ensure a long lasting, rust free building.
The wall panels have a "PBR" profile which stands for Purlin Bearing Rib. While some other suppliers may use the standard panel, Renegade uses the "PBR panel on the roof and walls of our buildings. This feature gives the system rigidity and weathertightness. Other panel profiles are available and have the purlin bearing system.
One other BIG difference in a Renegade building is that whenever a customer decides they want a window, we always include a framed opening. This provides a sturdy and secure structure for the window to attach to. It also provides a better fit for weather tightness.
Other companies may take the cheap approach and just sell a window that simply screws into the wall panel.
30x30 steel building common uses