A 60x100 steel building is a great choice for 6,000 square feet of space.  The clear span design of a pre-engineered steel building means you have plenty of open floor space.  Whether your plans call of an auto lift, wood working equipment, warehouse shelving or assembly space, your sure to have room to accommodate your needs with this Renegade Steel Building.

A 60'x100' long building is typically designed with 4 bays at 25'.  Of course there are options for 20' bays up to 30' bays, but 4 at 25' is usually the most economical.  This gives you room for additional roll up doors and walk doors.  The endwall can support even wider doors like sliding or hydraulic hangar doors.

Talk to us about your 60x100 steel building needs and we can help you get the most economical design.  And don't forget, you can always customize your steel building to get the look you want.

60x100x16 steel building red iron frame only illustration
Whether you are looking to open a new business, expand your current business, or need space for your hobby, Renegade can help you with your project to get the best building at the best price to suit your needs.  Let us know what we can do to help with your project.

How much does a 60x100 steel building cost?

There are many factors in the cost of a steel building such as wind and snow loads and options you want on your building.

60x100x10 Starting at $48,100*

*Plus tax, shipping, codes and loads changes and any additional options.  Please call or fill out our quick quote for accurate, up to date pricing.
*Pricing based on specified wind and snow load, your location may require different loads which may affect the price. While Renegade Steel Buildings tries to ensure that info on this website is accurate, RSB is not responsible for typographical or pricing errors, omissions or technical inaccuracies. Prices subject to change without notice.
  • IBC 2018 code (108 mph wind / 5 lb ground snow)
  • Stamped Engineered Plans
  • 1:12 roof pitch
  • (1) 3070 walk door
  • (1) 12x12 Framed Opening
  • Simple Eave Trim
  • Galvalume Roof

Renegade Standard Features

I-beam mainframe construction
Galvalume Roof Panels
26 Gauge "PBR" roof and wall panels
Long Life fasteners in the roof & walls
Nuts and bolts for framing (anchor bolts not included)
Clear span design unless otherwise requested
Deluxe Trim
Formed Ridge cap
Designed for your location
Engineer Stamped Drawings

Renegade Options

Color Roof
Roof line extensions
Soffit panels for extensions
Gutters and Downspouts
Wall lights
Liner Panels
Roof Pitch
Vent Fan
Roll Up door
Ridge Vent
Higher Eave Height
Click for more info to customize your steel building.
*Images above are for illustration purposes only and are not representative of the pricing.

What makes a Renegade Steel Building Different?

PBR Panels

"PBR" stands for Purlin Bearing Rib. While others may use a standard panel, Renegade uses the "PBR" panel on the roof and walls of our buildings. This gives the system rigidity and weathertightness. Other profiles are available with the purlin bearing system.
Steel Building PBR panel illustrationsteel building pbr panel illustration

Why it matters

If you watch the illustrations you'll notice that the screw that attaches at the panel overlap high rib.  On the PBR panel on the top, the screw is able to penetrate both panels equally.  On the Non-PBR panel in the second illustration, you will notice that there is no support which can lead to the screw pushing in on the bottom panel causing a gap.
Steel building zinc screw with washer illustration

Long Life Screws

Renegade's long-life, self drilling fasteners are cast aluminum zinc with a EPDM sealing washer help enforce the finish warranties and ensure a long lasting, rust free building. We include these on both the roof and walls.

Why it matters

Not all steel building companies provide these screws for both roof and walls.  Without the sealing washer, you are more likely to see a leak and if the screw head scratches the finish, you could even see rust on your panels .
Formed base trim illustration

Formed Base Trim

The base of our buildings uses formed base trim. This heavier gauge, one piece system installs quicker and supports your manufacturers warranty for your wall panels.

Why it matters

Other base conditions can be base angle and flashing or a concrete notch.  The 2 piece system can have issues with installation and the old concrete notches can hold water.
steel building window framed opening

Framed Openings

Whenever a customer wants a window, we always like to include a framed opening. This provides a sturdy and secure structure for the window to attach to allowing for better fit and finish. Other companies may take the cheap approach and just sell a window that simply screws into the wall panel.

Why it matters

Sure, you can just screw a self flashing window to the wall panel, but why would you.  Every steel building allows for a small amount of movement due to wind and seismic activity.  These movements can cause a window to work loose over time if there is no frame to attach to.
steel building girt clip

Factory Welded Clips

Clips for the roof purlins and wall girts are factory located and welded saving you time when erecting your building.

Why it matters

Having the clips factory located means less labor and quicker install times, not to mention fewer nuts and bolts to deal with.

More Steel Building Sizes

50x75    50x100    60x60    60x80    75x100    100x100    100x150    100x200

Give us a call today at 877-363-4233, email us at sales@renegadebuildings.com or fill out our quote form.

Price your steel building